I suggest using the LED Trailer Clearance or Side Marker Light with Reflex Reflector - 2 Diodes - Amber Lens # 328-K-51 it has the overall 4 inch length you need and it is 1-1/2" inches wide. view full answer...
It looks like you have the Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28 installed on your enclosed trailer's existing rain gutter rails. For a different trailer that does not have these mounting rails I recommend using a track type rack system such as the Yakima HardTop SL # Y01618 since we do not have adapters to allow installing the Rack'em to a flat roof surface.
This adjustable Yakima rack uses tracks that mount to the trailer roof (not to the side edge like the Rack'em) and... view full answer...
Hey Tom, you are on the right track. I checked out your 2023 Jayco Jay Flight 284 BHS and it does have an underslung coupler so the correct B and W Continuum weight distribution would be the part # BW88FR.
An underslung coupler is basically one that mounts to the bottom of the trailer frame and an overslung is one that attaches to the top. I attached a picture of one to show you what I mean. view full answer...
Hey Don, actually you can use either but if was me I would go with the Voyager adapter part # VGR64VR since its more of a permanent install and wouldn't require you to have to remember the adapter everytime you plan to tow. view full answer...
The two blue wires for the # DMC79FR control box wiring are signal wires. They complete the circuit at the furnace control board when the furnace should be running. view full answer...
We do have 12" wheels with a 4 on 4 bolt pattern. Since this is for a boat trailer, I recommend getting an aluminum wheel like the # AM22318HWT or at least a galvanized wheel like # AM20124. I went ahead and attached a link below to all of our 12" wheels with a 4 on 4 bolt pattern. Wheel and tire combinations are also available if you're looking to replace tires as well. view full answer...